RADWAG MAC 210 Moisture Analyzer - Manual (Page 57)

57
Function
IMMEDIATELY SEND THE RESULT IN CURRENT UNIT
Command
SUI CR LF
(sends the result in current used unit from the
instrument)
Function
ZERO THE INDICATION
Command
Z CR LF
(zeroes the indication on stable readout)
Function
TARE WHEN STABLE
Command
T CR LF
(TARE the indication on stable readout)
Function
SWITCH OFF CONTINUOUS TRANSMISSION IN BASIC UNIT
Command
C0 CR LF
(stops continuous transmission in basic unit)
Function
SWITCH ON CONTINUOUS TRANSMISSION IN BASIC UNIT
Command
C1 CR LF
(starts continuous transmission in basic unit)
Function
GIVE SERIAL NUMBER OF THE INSTRUMENT
Command
NB CR LF
(sends factory number)
Function
GIVE WEIGHING RANGE
Command
FS CR LF
(send instrument’s value of max capacity in basic unit)
Function
GIVE SOFTWARE VERSION
Command
RV CR LF
(sends name and version of the instrument’s software)
Function
SEND SETUP
Command
PS CR LF
(sends all instrument’s setup – printout of the
parameters)
Caution!
Sending a command to the instrument which is not in the above list or has
an error, and it is finished with CR LF, causes instrument’s response in
format E S CR LF. Spaces provided in the command formats should be
omitted, as they are given for proper legibility of the commands.