RADWAG MAC 210 Moisture Analyzer - Manual (Page 50)

50
Displays mass change recorded during drying process, and expressed in
percent,
• Part of dry mass obtained in drying process, and expressed in percent
Measurement result is part of mass that is remaining on the drying pan after
humidity content evaporation,
• Humid / dry ratio obtained as a result of drying process, and expressed in
percent.
Measurement result is part of mass that evaporated from the dried sample in
drying process,
• Mass change
Measurement result is mass change recorded by the moisture analyzer in the
drying process.
15. DRYING PROCESS WITH USE OF DRYING PROGRAM LIBRARY
In order to start drying process with use of drying program library, the user has to
enable access to the libraries in moisture analyzer’s menu: parameter – P6-01 Libr
has to be attributed <YES> (see point 9.3. of this user manual). The moisture
analyzer MAC series can comprise up to 20 drying procedures / programs, which
are optionally configured, saved and used by selecting one of them.
Should one of drying procedures / programs be used, follow below guidelines: