RADWAG MAC 210 Moisture Analyzer - Manual (Page 12)

12
2.9.1. Protective clothing
The use of protective clothing is highly recommended while working with the
instrument in order to take safety precautions against potential hazards
resulting from tested samples and ingredients.
Use the following while carrying out tests:
• protective apron,
• protective glasses,
• protective gloves (while working with hazardous chemical
substances).
Before the use of the above-mentioned protective clothing, make sure that they
are designed to be used with specific samples and they are not damaged.
3. TRANSPORT I STORAGE
3.1. Delivery check
Please check the packaging immediately upon delivery and the device during
unpacking for any visible signs of external damage.
3.2. Packaging
Please retain all parts of the original packaging should the moisture analyzer
be transported in the future. Only the original packaging should be used for
dispatching the moisture analyzer. Before packing, disconnect all attached
cables and remove any loose/movable parts (weighing pan, shields, inserts).
Place moisture analyzer and its components in their original packaging, and
protect them against damage during transport.
4. UNPACKING, ASSEMBLING AND STARTUP
4.1. Assembling and place of use
• A moisture analyzer should be stored and used in locations free of
vibrations and shakes, free of air movement and dust, located at the
max altitude of 2000 above sea level,
• Moisture analyzer’s place of use should ensure good air circulation
around the instrument (approximately 20 cm fee space around the
moisture analyzer and 1 m free space over it),
• Ambient air temperature in the weighing room should not exceed the
range of:
+10 °C ÷ +40 °C,