RADWAG MAC 210 Moisture Analyzer - Manual (Page 11)

11
with the supply in the mains to which the moisture analyzer will be
plugged in,
- replecemant of halogen lamps can only be carried out by
authorized service
,
- protect moisture analyzer against contacts with liquids, it might lead
to electrocution, fire, emission of substances containing toxic or
caustic vapour, emission of explosive substances.
2.6. Warranty
Warranty does not cover the following cases:
• Not observing the regulation listed in user manual,
• Using the moisture analyzer conversely to its intended use,
• Any modifications of moisture analyzer or cases when its housing is
opened (damaged protective stickers),
• Mechanical defects and defects caused by media, liquids, water and
natural wearing off,
• Improper placing of defects of electrical network / mains,
• Overloading of measuring mechanism of the moisture analyzer.
2.7. Monitoring metrological parameters of the instrument
Metrological characteristics of the moisture analyzer requires periodical
inspection carried out by its operator. Inspection frequency is conditioned by
ambient conditions in which the moisture analyzer is used, types of performed
processes and accepted quality management system in an organization.
2.8. Data included in this user manual
Please read the user manual carefully before instrument’s plugging to mains
and startup, even if the user is experienced with this type of moisture
analyzers.
2.9. Staff competence
Moisture analyzer MA 3Y series should only be operated and maintained by
personnel who is trained and experienced in using this type of instruments.
In order to use the moisture analyzer, first read the user manual. Keep these
instructions for the future reference.
Do not make any structural modifications. Additional equipment, which can be
connected to the moisture analyzer, should be supplied by RADWAG or an
authorized distributor.