12 eliminating faults – Festo Линейный привод с датчиком перемещения DGPIL User Manual
Page 35

DGPI(L)−...−AI F
Festo DGPI(L)−...−AIF 0409a English
35
12
Eliminating faults
Fault
Possible cause
Remedy
Slide does not come into
stroke end position
Adjusting screw of end position
cushioning completely closed
Open adjusting screw
Heavy leakage
Cylinder is distorted
Fasten the cylinder to a flat base
Seal worn
Return to Festo for repairs
Cylinder does not reach the
desired speed
Air volume not sufficient
Increase connection cross−sections;
switch volume upstream
High friction or counteracting
force
Select larger drive
Faults in position scanning
Heavy external magnetic fields,
environmental disturbances
outside the specification
Eliminate external magnetic fields,
note specification
Further notes on eliminating faults see documentation for the control system
(e.Ăg.ĂSPC11/200).