NOVUS Web Server – WS10 - Manual (Page 8)

Web Server – WS10
NOVUS AUTOMATION 8/33
The WS10 configuration files are:
MODBUS.CFG Data acquisition configuration for the ModbusRTU network (WS10 as the network master)
LOCALIO.CFG Configuration and calibration of local inputs
WEBS.CFG Configuration of the HTML page server
PPP.CFG Modem configuration for originating data calls (PPP client)
MODBUS2.CFG Configuration of the WS10 as a slave in a ModbusRTU network
CLITCP.CFG Configuration for the periodic send of data to a Server.
DATALOG.CFG Configuration of the WS10 for the historical logging in internal Flash memory
ALARMS.CFG Configuration of the alarm condition supervision or exceptions
MAIL.CFG WS10 configuration for e-mail transmission
MODBTCP.CFG ModbusTCP configuration
MAP.CFG Registers memory map definition for ModbusTCP or ModbusRTU-Slave access
DNS.CFG Addresses for DNS servers.
CHIP.INI FILE
The CHIP.INI file belongs to the WS10 operating system and shall not be altered, except in particular situations, listed
below. Tampering on this file may result on WS10 failure.
Only in the cases listed below should the CHIP.INI file be modified:
•
Change of the security level and passwords for the Telnet console access.
•
Change in the security level and passwords of the FTP server.
•
Configuration of the WS10 for receiving a data phone call (PPP Server).
Further details can be obtained in the sections that deal with security and modem configuration for data transfer.