elektraLite CP100xt Manual Part One - Manual (Page 63)

63
dbo switch yes if gated by the D.B.O. switch, no otherwise. The default is yes if the feature
name is Dim , no otherwise. You may want to use this feature for your shutter channels.
dbo toggles the state of the DBO parameter.
color switch yes if this is a color feature, no otherwise. The default is yes if the feature name
is Color or starts with Col r, no otherwise.
color toggles the state of the color parameter. That is, it forces the feature to be interpreted as a
color feature if its name isn’t Color and doesn’t start with Col r, or forces it not to be interpreted as
the tilt feature if its name is Color or starts with Col r.
gobo switch yes if this is a gobo feature, no otherwise. The default is yes if the feature name
starts with Gob o, no otherwise.
gobo toggles the state of the gobo parameter. That is, it forces the feature to be interpreted as a gobo
feature if its name doesn’t start with Gob o, or forces it not to be interpreted as a gobo feature if its
name starts with Gob o. You may want to use this feature if you label your gobo feature something
like “litho”.
pan switch yes if this is the pan feature, no otherwise. The default is yes if the feature name is
Pa n, no otherwise. An error results if there is already a pan feature.
pan toggles the state of the pan parameter. That is, it forces the feature to be interpreted as the pan
feature if its name isn’t Pa n, or forces it not to be interpreted as the pan feature if its name is Pa n.
tilt switch yes if this is the tilt feature, no otherwise. The default is yes if the feature name is
Til t, no otherwise. An error results if there is already a tilt feature.
tilt toggles the state of the tilt parameter. That is, it forces the feature to be interpreted as the tilt
feature if its name isn’t Til t, or forces it not to be interpreted as the tilt feature if its name is Til t.
invert switch yes if the output range for the feature should be reversed. That is, a feature value
of zero corresponds to a channel output value of 255. The default is n o. Use this, for instance, if one
manufacturer’s Zoom or Iris feature is backward relative to another’s.
invert equivalent to invert ye s.
sudden switch yes if the initial end threshold is zero, no if it is 100. This is the end threshold
that is automatically selected when a new feature is brought into a cue, before the user has adjusted it.
The initial start threshold is always zero. Thus, a
sudden feature snaps to its value instantly, while a
non- sudden feature glides smoothly, unless the user manually adjusts the thresholds. The default is
yes if the feature
name is Ctrl or Lam p, no otherwise.
sudden toggles the state of the sudden parameter. That is, it is turned off if the feature
name is Ctrl or Lam p, on otherwise.