Hubbardton Forge 307930 - Manual (Page 2)

Installation Instructions
B174
For Outdoor Wall Sconce 30-7930 Page 2 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
22709 Rev A
To Assemble & Install Glass Option (Figures 3 & 4)
Component Parts
C Fixture
I
Brass Screw
J Top Ring
K Glass
L Retaining
Ring
M Mounting Bracket
N Cap Screw (2)
1. Slide retaining ring (L) over glass (K) aligning holes with
slots in glass.
2. Slip cap screw (N) thru hole in retaining ring (L) (both
sides).
3. Align mounting bracket (M) with holes in retaining ring
(L).
4. Thread cap screws (N) into mounting bracket (M) and
tighten.
5. Slide glass (K) into top ring (J) and align tab on mounting
bracket (M) with the mounting bracket window in the
fixture (C).
6. When glass (K) is tight against fixture (C) tighten brass
screw (I) from the bottom of the fixture. See Figure 4.
7. Restore electricity at the main breaker.
(continued)
(Figure 3)
(Figure 4)