beautypg.com

B274, Installation instructions – Hubbardton Forge 306603 User Manual

Page 2

background image

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

CASTLETON, VERMONT 05735

All designs and images ©1989-2013 Hubbardton Forge

®

. All rights reserved.

27824 Rev A

Installation Instructions

To Mount Fixture to Wall

(Figures 1 & 2)

(Continued)

4. Hold the fixture assembly (A) close to the wall mount
bracket and using suitable wire connectors (not provided),
connect fixture wires to supply wires (white to white or
ribbed and black to black or smooth). Ground the mounting
bracket using the green ground screw (G) and cupped
washer (H) to secure a pigtail lead to the bracket and con-
nect all ground wires (bare copper or green to bare copper
or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRES ARE EXPOSED.

5. Apply a generous bead of a suitable caulking material (not

provided) to calking lip (I) on the fixture (Figure 2).

6. Carefully tuck all wires behind the fixture assembly and

inside the wall mount bracket and place the fixture firmly

onto bracket (B) and fasten with #8 black screws (E) and

rubber washers (F) on top.

7. Install two remaining black screws (E) in bottom of fixture

attaching to wall mounting bracket (B).

To Install Glass

(Figures 3-5)

Component Parts

A Fixture Assembly

J Round Block

K Glass

L Large Rubber Washer

M #8 Black Screw

N Thumb Screw

O Socket

P Metal Washer

1. Remove round block (J) along with rubber & metal washers

(L&P), #8 screw (M) and thumb screw (N). Round block and
hardware are shipped installed (Figure 3).

2. Attach glass (K) to round block (J) using #8 screw (M), rub-

ber washer (L) and metal washer (P). (Figure 4).

Note: Be sure not to over tighten the screw.

3. Thread bulb (not included), into socket (O).

B274

Pluto Outdoor Sconce 306603

Page 2 of 3

J

P

M

(Figure 3)

L
N

(Continued)

O
A

J

L

(Figure 4)

K

P
M