Hubbardton Forge 204301 - Manual (Page 3)

Installation Instructions
B200
For Constellation Sconce 20-4301 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24399
To Install Glass (Figure3)
Component Parts
I Socket
J Bulb (Included)
K Inner Glass
L Outer Glass
M Glass Spring Clip
1. Install light bulb (J). Be careful not to touch bulb with bare hands; oil
from the hands will dramatically reduce bulb life.
2. Slip inner glass (K) over socket (I) until it engages with glass spring
clip (M).
3. If glass has a loose fit the glass spring clip (M) can be adjusted by taking a
pair of needle noose pliers and bending the three prongs outward.
4. Install outer glass (L).
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)