Hubbardton Forge 205955 - Manual (Page 3)

Assembly & Installation Instructions
B284
Bento Sconce 20-5955F Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 28097 Rev B
Install Shade (Figures 5 & 6)
Component Parts
A Fixture
I Shade Bracket (2)
J 8- 32 x 3/8” Black Screws (2)
K Shade
1. Remove both shade brackets (I) from fixture (A) by removing the black screws (J). Hold onto brackets (I) and
screws (J) for later use (Figure 5).
2. Install bulb (not included).
3. Place the shade (K) into the bracket slot of the fixture (A). Attach the shade brackets (I) with the black screws (J)
to complete the shade installation (Figure 6).
Note: Shade edges may need to be creased slightly by hand for a proper fit.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 5)
(Figure 6)