Hubbardton Forge 18305 - Manual (Page 3)

Installation Instructions
A296
Flora Pendant 18-305 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 26973
To Install Single Glass Option (Figure 4)
Component Parts
L Socket
M Bulb
(Included)
N Glass
O Retaining
Ring
P Retaining Ring Tool
1. Remove retaining ring (O) from socket (L) and retain. Retaining ring ships installed.
2. Install light bulb (M). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see the fixtures wattage
sticker for Max wattage information.
3. Slip glass (N) over socket (L) and thread retaining ring (O) onto socket (L) using
provided retaining ring tool (P).
4. Restore electricity at main breaker.
To Install Double Glass Option (Figure 5)
Component Parts
L Socket
M Bulb
(Included)
N Glass
O Retaining
Ring
P Retaining Ring Tool
Q Inner Glass
1. Remove retaining ring (O) from socket (L) and retain. Retaining ring ships installed.
2. Install light bulb (M). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see the fixtures wattage
sticker for Max wattage information.
3. Place inner glass (Q) inside glass (N) and then slip glass (N) over socket (L). Thread
retaining ring (O) onto socket (L) using provided retaining ring tool (P).
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the
dealer from which you purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation,
lamping or use of this fixture.
(Figure 4)
(Figure 5)