Hubbardton Forge 137680 User Manual

A329, Assembly & installation instructions

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28118

Assembly & Installation Instructions

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

Unpack Fixture

(Figure 1)

Component Parts

A Ceiling Bracket

B Cable Gripper (2)

C Gripper Nut (2)

D Canopy

J Cupped Washer

K Hex Nut (2

1. Carefully unpack the fixture from the carton.

2. Ceiling Bracket (A) and canopy (D) are shipped fastened

together.

3. Unscrew both gripper nuts (C) and separate canopy (D) and

ceiling bracket (A), set aside.

4. Remove both hex nuts (K) and cupped washer (J) from

ceiling bracket (A).

To Install to Ceiling

(Figures 2 - 6)

Component Parts

A Ceiling Bracket

B Cable Gripper (2)

C Gripper Nut (2)

D Canopy

E Support Cable (2)

F Fixture

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.

1. Using two machine screws (not provided), fasten the ceiling

bracket (A) to the electric box. (Figure 2).

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

2. Attach canopy support cable (L) to ceiling bracket (A) using

hex nut.

A329

Stream Pendant 137680

Page 1 of 4

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Continued)

A
B

G Supply wire

H Strain Relief

I Washer

J Cupped Washer

K Hex Nut

L Canopy Support Cable

(Figure 1)

(Figure 2)