Hubbardton Forge 137720 - Manual (Page 2)

Assembly & Installation Instructions
A276
Erlenmeyer 4-Light Pendant 13-7720 Page 2 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 26494
To Install Fixture
(Figures 4 & 5)
Component Parts
D Canopy
F Ceiling
Bracket
K Crossbar
L Screws
(2)
M Ground screw
N Wireway
Cover
O Threaded Tube
P Knob
Caution: Be sure power is off at the main breaker box prior to installation.
1. Using two machine screws (not provided), fasten the crossbar (K) to the electric box using outer oval slots to
orient fixture to desired hanging position.
Note: A new electric box comes with screws. When replacing a fixture, retain the existing screws for use with the
new fixture.
2. Raise canopy (D) to ceiling and align holes in crossbar (K) with holes in the ceiling bracket (F). Thread screws
(L) into crossbar to secure fixture to the ceiling. Move ground screw (M) to another available threaded hole if
necessary.
(continued)
(Figure 4) (Figure 3)