Hubbardton Forge 136555 - Manual (Page 4)

Assembly & Installation Instructions
A339
Moreau Six Light Pendant 136555 Page 4 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24825
Install Bulb and Glass
(Figure 6)
Component Parts
P Bulb (included)
Q Retaining Ring (6)
R Glass (6)
S Socket (6)
1. Remove retaining rings (Q) from sockets (S) and
set aside for later use. Retaining rings are
shipped installed on the sockets.
2. Install light bulb (P). Be careful not to touch bulb
with bare hands; oil from the hands will
dramatically reduce bulb life.
3. Slip glass (R) over socket (S) and thread retaining
ring (Q) onto socket (S). Repeat for all six
sockets.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 6)