Hubbardton Forge 136753 - Manual (Page 3)

Assembly & Installation Instructions
A176
Impressions Adjustable Pendant 13-6753 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 21362 Rev C
Install Glass (Figure 4)
Component Parts
N Top Diffuser
O Socket Assembly
Q Spider Assembly
R Thumb Screw (2)
S Glass
T Bottom Diffuser
1. Place glass (S) into notches of spider
assembly (Q).
2. Lift top diffuser (N) and place spider assembly
(Q) with glass (S) installed on top of socket
assembly (O).
3. Turn spider assembly (Q) so the holes match
the threaded holes in the socket assembly (O).
4. Install thumb screws (R).
5. Install light bulbs.
6. Insert the bottom diffuser (T) up into the
fixture at an angle then level it and gently
lower onto the lowest tabs of the spider assembly (Q).
7. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4)