Hubbardton Forge 133325 - Manual (Page 4)

Assembly & Installation Instructions
A260
Kirigami Four Light Pendant 13-3325 Page 4 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24799 Rev A
To Install Bottom Assembly
(Figure 7)
Component Parts
O Bottom Assembly
V Flat Head Screws (3)
W Locking
plate
1. Raise bottom assembly (O)
aligning flat head screws with the
larger holes in the slots in the
locking plate (W).
2. Pushing up on the bottom
assembly (O) turn clockwise until
the bottom assembly stops in the
locked position.
3. Install light bulbs. Not Included
4. Restore electricity at main
breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 7)
(Figure 6)