Allied Telesis AT-FS724 - Manual (Page 32)

,QVWDOODWLRQ
2-12
3RUW#&RQILJXUDWLRQ
Port configuration defines the status and modes for each port. The
default configuration and a description of each setting follow the
configuration steps below.
6WHSV#7R#9LHZ
3RUW#6WDWXV#2U
&KDQJH#3RUW
&RQILJXUDWLRQ
Connect and setup a terminal as described on page 2-11. The switch
displays the
Port Status menu and provides access to the Port
Configuration menu for a port.
1. The Port Status displays a list of ports. The example below
shows a switch with eight ports online.
2. Select a port number, for example, Port 11, by pressing the up
arrow key to highlight it, and then pressing RETURN to display its
configuration information:
An enabled option is displayed in bold and preceded by a >
symbol.
Allied Telesyn AT-FS718 Ethernet Switch: 1.3
Port Link Status Mode
1: Online Enabled Auto negotiate
2: Online Enabled Auto negotiate
3: Online Enabled Auto negotiate
4: Online Enabled Auto negotiate
5: Offline Enabled Auto negotiate
6: Offline Enabled Auto negotiate
7: Offline Enabled Auto negotiate
8: Offline Enabled Auto negotiate
9: Online Enabled Auto negotiate
10: Online Enabled Auto negotiate
11: Online Enabled Auto negotiate
12: Online Enabled Auto negotiate
More ...
Quit
Port Configuration Menu
Port 11
Link State:Online
Port State:Enabled
Please select an option:
> Enable this port
Disable (partition) this port
> Auto negotiate
Full duplex
Half duplex
> Store-and-forward
Cut-through (for 100MBPS operation)
Port name
Return to Port Status Menu ...
Enabled options