Allied Telesis AT-FS724 - Manual (Page 13)

$70)6:4;#DQG#$70)6:57#,QVWDOODWLRQ#*XLGH
1-3
+DUGZDUH#)HDWXUHV
Table 1-1 summarizes the basic features of each switch model.
The switches have the following common hardware features:
❑ Half- or full-duplex operation on all switched ports delivering
up to 200 Mbps of bandwidth to servers, routers, or other
switches
❑ Auto-negotiation on all 10Base-T/100Base-TX ports for speed
and duplex in compliance with IEEE 802.3u specifications
❑ Non-blocking, clear-channel architecture delivers wire-speed
switching and up to 2.4 Gbps aggregate bandwidth for
exceptional performance
❑ Shared memory architecture with 512kb memory per 4 ports
❑ Store-and-forward switching mode, or, for 100 Mbps ports
only, fragment-free cut-through switching mode
❑ Packet buffer memory of 3.0 MB for the AT-FS718 and 3.5 MB
for the AT-FS724
❑ 8 MB DRAM and 2 MB Flash memory for software updates
❑ RS232 connector for port configuration, and diagnostics or
software updates.
Table 1-1 Switch Models
Model Port Description
AT-FS724 Twenty-four 10Base-T/100Base-TX ports
AT-FS718 ❑ Sixteen 10Base-T/100Base-TX ports
❑ Two slots, Port A and Port B, for optional
uplink connectivity to either 100Base-TX or
100Base-FX backbones