Allied Telesis AT-S84 - Manual (Page 283)

AT-S84 Management Software User’s Guide
Section II: Web Browser Interface 283
4. In the Path Cost column for the port you want to configure, type a
number for the Path Cost.
Path cost is described in “Path Costs and Port Costs” on page 147.
5. Click Apply.
6. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Click Apply.
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the Basic Config menu, select Rapid Spanning Tree and then
RSTP Adv. Port Config.