beautypg.com

Enabling or disabling the telnet server – Allied Telesis AT-S84 User Manual

Page 216

background image

Chapter 17: Basic Switch Parameters

216

Section II: Web Browser Interface

Enabling or Disabling the Telnet Server

To enable or disable the Telnet server, perform the following procedure:

1. From the Basic Config menu, select User Interface.

2. From the User Interface menu, select User Interface.

The User Interface page is shown in Figure 60 on page 212.

3. For the Telnet Server parameter, choose Enable or Disable from the

list.

The default is Enable. When you enable this parameter, a Telnet
connection to the switch is available.

4. Click Apply.

See also other documents in the category Allied Telesis Computer hardware: