Enabling or disabling the web server – Allied Telesis AT-S84 User Manual

Page 215

AT-S84 Management Software User’s Guide

Section II: Web Browser Interface

215

Enabling or Disabling the Web Server

To enable or disable the web server, perform the following procedure:

1. From the Basic Config menu, select User Interface.

2. From the User Interface menu, select User Interface.

The User Interface page is shown in Figure 60 on page 212.

3. For the Web Server parameter, choose Enable or Disable from the

list.

The default is Enable. When you enable this parameter, an individual
can manage the switch remotely using a web browser.

Note

Disabling the web server automatically ends your remote
management session.

4. Click Apply.