Allied Telesis AT-S84 - Manual (Page 207)

AT-S84 Management Software User’s Guide
Section II: Web Browser Interface 207
System MAC Address
This parameter displays the MAC address of the switch. You cannot
change this parameter.
System IP Address
Enter the IP address for the switch.
System Subnet Mask
Enter the subnet mask for the switch.
System Default Gateway
Enter the default gateway’s IP address.
DHCP Mode
For information about setting this parameter, refer to “Enabling and
Disabling the DHCP Client” on page 208.
3. Click Apply.
Note
Changing the IP address ends your management session. To
resume managing the device, enter the new IP address of the switch
in the web browser’s URL field, as shown in Figure 55 on page 200.