Allied Telesis AT-2972T/2 - Manual (Page 86)

Installing the NetWare Driver Software
86
Installing Novell NetWare Server 5.x or 6.0 Driver Software
Ensure that the server has the latest support pack available installed. The
latest support packs can be found at:
http://support.novell.com/misc/
patlst.htm .
You may want to create an archive disk by copying all the files from the
CDROM\Driver\Netware directory onto a floppy disk. If you use the CD-
ROM directly, be sure that the CDROM.NLM is loaded and that you are
aware of the NetWare Volume name for the CD-ROM that you just
installed.
To install the Novell NetWare Server 5.x or 6.0 driver software, perform
the following procedure:
1. From the NetWare Server console, type LOAD NWCONFIG (or just
NWCONFIG) and press Enter.
2. From the Configuration Options screen, select Driver options and
press Enter.
3. Select the Configure network drivers option and press Enter.
4. Choose the Load an additional driver option and press Enter.
5. Insert the CD-ROM and select the Install an unlisted driver option,
by pressing Insert.
6. If you are using the archive disk that you created, insert the disk into
drive A: and press Enter. If you have the CD-ROM mounted as a
NetWare volume, go to step 7.
7. If you have the CD-ROM mounted as a NetWare volume, press F3
and enter : Driver\Netware as the source path.
Where is the name of the NetWare Volume for the
CD-ROM and Netware\Driver is the directory of the specific files on the
CD-ROM needed for this installation.
The name of the driver is displayed.
8. Press Enter to select the highlighted driver.
A copy the driver prompt appears.
9. Select Yes and press Enter.
10. Select Yes and press Enter to copy the .LDI file. This is the installation
script for the driver.
11. Follow the instructions for the installation.