Allied Telesis AT-2972T/2 - Manual (Page 59)

AT-29xx Series Gigabit Ethernet Adapters Installation Guide
59
4. Click the Advanced tab.
The Advanced tab is shown in Figure 13.
Figure 13. Advanced Tab
5. From the Properties list, select 802.1p QOS.
6. From the Values list, select one of the following:
ˆ Enable - Enables the 802.1p QOS property.
ˆ Disable - Disables the 802.1p QOS property. This is the default.
Note
Enabling 802.1p QOS also requires an 802.1p aware switch.
7. Click OK.
8. If prompted to restart your computer, click Yes.