Allied Telesis AT-2972T/2 - Manual (Page 84)

Installing the NetWare Driver Software
84
Driver Installation
This chapter describes how to perform the following tasks:
ˆ Verify that the required OS support files are installed on the server and
the NetWare pre-installation parameters are set correctly.
ˆ Install the driver software in the Novell NetWare environment.
ˆ If necessary, reconfigure the driver software after installation.
ˆ For an adapter installation with an existing NetWare server, NetWare
automatically detects the new adapter and attempts to load the
appropriate driver. Ensure that your Allied Telesis CD-ROM is loaded
and select the appropriate driver for your Allied Telesis Gigabit
Ethernet adapter.
A commonly used method to install a driver on a NetWare server running
5.x or 6.0 and higher is through NWCONFIG.