Allied Telesis AT-2972T/2 - Manual (Page 70)

Installing Windows 2000 Driver Software
70
Removing the Driver Software
To remove the network adapter driver software, perform the following
procedure:
Caution
Before uninstalling the Allied Telesis device, be sure to capture all
Advanced Property settings because the properties are lost during
the uninstall process.
Note
Before physically removing an adapter from your system, first
remove the adapter driver software.
1. Start Windows 2000 and log in.
Note
You must have System Administrator privileges to remove the driver
software.
2. Open the Control Panel and double-click the System icon.
The System Properties dialog box opens, as shown in Figure 7 on
page 36.
3. Click the Hardware tab.
The Hardware Tab is shown in Figure 8 on page 37.
4. Click Device Manager.
The Device Manager Window is shown in Figure 9 on page 38.
5. In the Device Manager window, click the + next to the Network
Adapters folder.
The selection expands to show the list of installed network adapter
cards.
6. Right-click on the adapter to be removed and select Uninstall.
A Confirm Device Removal window opens.
7. Click OK to complete the uninstall.