Allied Telesis AT-2972T/2 - Manual (Page 28)

Installing the Hardware
28
6. Secure the network adapter card to the chassis with a Phillips-head
screw (not provided) as shown in Figure 4.
Figure 4. Securing the Adapter Card
7. Replace the system’s cover and secure it with the screws removed in
Step 2.
8. Disconnect any personal antistatic devices.
9. Power the system on.
Note
If you installed the adapter card in a Microsoft Windows 2000,
Windows Server 2003, or Windows XP system before installing the
driver software, the Found New Hardware Wizard launches
automatically. For more information, see Chapter 3, “Installing
Windows Server 2003 and Windows XP Driver Software” on page
31 or Chapter 4, “Installing Windows 2000 Driver Software” on page
55.
Once the system returns to proper operation, the adapter hardware is fully
installed. Next, connect the network cables. See “Connecting the Network
Cables” on page 29.