Allied Telesis AT-S86 - Manual (Page 92)

Chapter 9: IGMP
92
Enabling or Disabling IGMP Snooping
To enable or disable IGMP Snooping, perform the following procedure:
1. From the main menu, select Bridge > IGMP Snooping.
The IGMP Snooping page is shown in Figure 28.
Figure 28. IGMP Snooping Page
2. In the IGMP is: list, select Enabled or Disabled.
The default is Disabled.
3. To permanently save this change in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
4. Click OK.