Allied Telesis AT-S86 - Manual (Page 115)

AT-S86 Management Software User’s Guide
115
To initialize a port, perform the following procedure:
1. From the main menu, select Security > Port Access Control Status.
The Port Access Control Status page is shown Figure 35 on page 114.
2. Select the port you want to initialize from the list.
3. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to clear the changes and start over.
4. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
5. Click Save.