Allied Telesis AT-S86 - Manual (Page 121)

AT-S86 Management Software User’s Guide
121
The RADIUS page is shown in Figure 37.
Figure 37. RADIUS Page
2. In the Authentication Server IP field, specify the IP addresses of the
network server containing the RADIUS server software
3. In the Authentication Server Port field, specify the UDP port of the
RADIUS protocol.
4. In the Authentication Server Key field, specify the encryption key for
the RADIUS server.
5. In the Confirm Authentication Key field, retype the encryption key for
the RADIUS server.
6. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to clear the changes and start over.
7. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
8. Click Save.