Allied Telesis AT-S86 - Manual (Page 71)

AT-S86 Management Software User’s Guide
71
selectively click the ones you do not want included.
4. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to clear the changes and start over.
5. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
6. Click Save.
Viewing a Port-
Based VLAN
To view a port-based VLAN, perform the following procedure:
1. From the main menu, select Bridge > VLAN > Port-Based VLAN.
The Port-Based VLAN page is shown in Figure 20 on page 69.
2. In the Show Port-Based VLAN list, select the VLAN you want to view.
The graphic image of the switch is updated to show the ports that are
included in this VLAN.