Allied Telesis AT-S86 - Manual (Page 29)

AT-S86 Management Software User’s Guide
29
6. Click Save.
Modifying an IP
Address in the IP
Access List
To modify an IP address in the IP access list, perform the following
procedure:
1. From the main menu, select System > IP Access List.
The IP Access List page is shown in Figure 6 on page 28.
2. In the IP address list, highlight the IP address you want to modify.
The address is displayed in the IP Address field.
3. In the IP Address field, modify the IP address.
4. Click Modify.
5. Do one of the following:
ˆ Click OK to save the modifications.
ˆ Click Reload to clear the fields and start over.
6. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
7. Click Save.
Removing an IP
Address from the
IP Access List
To remove an IP address from the IP access list, perform the following
procedure:
1. From the main menu, select System > IP Access List.
The IP Access List page is shown in Figure 6 on page 28.
2. In the IP address list, select the IP address you want to remove.
3. Click Remove.
4. Click OK.
5. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
6. Click Save.