Allied Telesis AT-S63 - Manual (Page 644)

Chapter 36: TACACS+ and RADIUS Protocols
644 Section IX: Management Security
Displaying RADIUS Status and Settings
To display the RADIUS status and settings, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 2 on page 31.
2. From the System Administration menu, type 6 to select Authentication
Configuration.
The Authentication Configuration menu is shown in Figure 237 on
page 636.
3. From the Authentication Configuration menu, type 4 to select RADIUS
Configuration.
The RADIUS Client Configuration menu is shown in Figure 240 on
page 641.
4. From the RADIUS Client Configuration menu, type 6 to select Show
Status.
The Show Status menu is shown in Figure 242.
Figure 242. Show Status Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Show Status
Global Configuration
--------------------
Encryption Key : ATI
Server Timeout: 30 second(s)
Server IP Address Auth Port Encryption Key Auth Req Auth Resp
---------------------------------------------------------------
149.11.11.11
1812 WRRT 100 96
149.22.22.22 1812 LLST 4 4
149.22.22.22 1812 OORT 0 0
U - Update Display
R - Return to Previous Menu
Enter your selection?