Allied Telesis AT-S63 - Manual (Page 113)

AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 113
3. From the Port Trunking and LACP menu, type 1 to select Static Port
Trunking.
The Static Port Trunking menu is shown in Figure 37.
Figure 37. Static Port Trunking Menu
This menu lists the current trunks on the switch. The information
includes the following:
 ID - The ID number of the static port trunk.
 Name - The name of the trunk.
 Ports - The ports of the trunk.
 Method - The load distribution method, which can be one of the
following:
SRC MAC Source MAC address.
DST MAC Destination MAC address.
SRC/DST MAC Source address/destination MAC address.
SRC IP Source IP address.
DST IP Destination IP address.
SRC/DST IP Source address/destination IP address.
 Status - The operating status of the trunk. If the trunk has
established a link with the other device, the status will be UP. If the
trunk has not establish a link or the ports in the trunk are disabled,
the status will be DOWN.
4. To create a new trunk, type C to select Create Trunk.
Allied Telesis AT-9448T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Static Port Trunking
ID Name Ports Method Status
----------------------------------------------------
C - Create Trunk
D - Delete Trunk
M - Modify Trunk
R - Return to Previous Menu
Enter your selection?