Allied Telesis AT-S63 - Manual (Page 292)

Chapter 18: IGMP Snooping
292 Section III: Snooping Protocols
Configuring IGMP Snooping
To configure IGMP snooping on the switch, perform the following
procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 117.
Figure 117. Advanced Configuration Menu
2. From the Advanced Configuration menu, type 2 to select IGMP
Snooping Configuration.
Note
For information on option 1, RRP Snooping Configuration, refer to
Chapter 20, “RRP Snooping” on page 311. For information on option
3, MLD Snooping Configuration, refer to Chapter 19, “MLD
Snooping” on page 301. For information on option 4, Power Over
Ethernet (PoE) Configuration, refer to Chapter 17, ”Power Over
Ethernet” on page 279.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Advanced Configuration
1 - RRP Snooping Configuration
2 - IGMP Snooping Configuration
3 - MLD Snooping Configuration
4 - Power Over Ethernet (PoE) Configuration
R - Return to Previous Menu
Enter your selection?