Allied Telesis AT-S63 - Manual (Page 273)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 273
5. To display the specifics of a policy, type D to select Display Policy
Detail.
The following prompt is displayed:
Available Policy(ies): 0-4
Enter Policy ID : [0 to 255] -> 0
6. Enter the ID number of the policy you want to view. You can display
only one policy at a time.
The Display Policy Details menu is shown in Figure 105.
Figure 105. Display Policy Details Menu
The Display Policy Details menu provides the following information:
Policy ID
The policy ID number.
Description
The policy description.
Remark DSCP
Whether the ingress DSCP value is overwritten. If All is specified, all
packets are remarked. If None is specified, the function is disabled.
The default is None.
DSCP value
The replacement value to write into the DSCP (TOS) field of the
packets.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Display Policy Details
1 - Policy ID ................ 11
2 - Description .............. policy_ca2
3 - Remark DSCP .............. None
4 - DSCP value ............... 42
5 - ToS ......................
6 - Move ToS to Priority ..... No
7 - Move Priority to ToS ..... No
8 - Send to Mirror Port ...... No
9 - Traffic Class List .......
A - Redirect Port ............
B - Ingress Port List ........ 15
D - Egress Port ..............
U - Update Display
R - Return to Previous Menu
Enter your selection?