Allied Telesis AT-S63 - Manual (Page 253)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 253
The Flow Group Configuration menu is shown in Figure 89 on page
249.
4. From the Flow Group Configuration menu, type 3 to select Destroy
Flow Group.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
5. Enter the ID number of the flow group you want to delete. You can
delete only one flow group at a time.
The selected flow group is displayed in the Destroy Flow Group menu.
You can use the menu to verify that you are deleting the correct group.
An example is shown in Figure 92.
Figure 92. Destroy Flow Group Menu
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed from
any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with step
4.
8. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
Displaying Flow
Groups
To display flow groups, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Destroy Flow Group
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
D - Destroy Flow Group
R - Return to Previous Menu
Enter your selection?