Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual

Page 57

Text mode
Original mode

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE

Page 57 of 124

Note

- It takes times to get values for many variables. To improve

performance, you can limit the number of variables to be displayed to about

10. You can further improve performance by increasing the polling interval

when the volume of the data is high.

MIB display

MIB set

Sets a value for the MIB variable. Specify a variable and a value to set. You

must specify the variable with an instance number. For example, 'sysDescr.0'
or rptrMonitorPortEntry.1.8' are valid examples. If you specify a variable

without an instance such as 'sysDescr', the set operation cannot be

performed.

Note

- The MIB set operation changes the data structure in the device's

SNMP agent. Take care when using this function.