beautypg.com

Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual

Page 16

background image


AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE

Page 16 of 124

Starting from SNMPc

Note

- SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's Read/Write

Access Mode

attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP V3

Auth-SHA

, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3

settings configured on the target device.

2.2.2 Starting From HP OpenView Network Node Manager

To start Device Manager from HP OpenView, select a node on the map window,
then select AlliedView-EMS Device Manager from the Tools menu.

Note that Device Manager and HP OpenView run independently of each other, so exiting

HP OpenView has no effect on Device Manager. Device Manager continues to run even

after HP OpenView stops running. To exit Device Manager, select Exit from its File menu.