Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 48)

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 48 of 124
"Both" option displays a MIB variable name in both English and its original form.
Examples:
System Description (sysDescr.0)
System Contact (sysContact.0)
System Name (sysName.0)
System Location (sysLocation.0)
Omit Display
In the Edit tab of dialog boxes, where MIB variables can be edited, "Stack#.Port#"
is appended at the end of the MIB variable name. If you want to omit this suffix,
check this box.
The X-axis display name of the chart and graph is displayed with the number
When checked, item names on the graph/chart's x-axis are displayed as numbers
instead of variable names. This option may be useful when you view a lot of variables
on a screen.
Encoding
Specifies the character encoding system to use in sending and receiving SNMP data.
SNMP receive data encoding
Specifies the character encoding of the data received from the device. Your options
are None, Auto detect, Shift JIS, JIS, and EUC.
Note - In some cases, Device Manager may not be able to recognize the SNMP data
encoding format received when "Auto detect" is selected. If this occurs, you will
need to specify the appropriate SNMP data encoding format.
SNMP send data encoding
Specifies the character encoding of the data sent by the device. Your options are
None, Shift JIS, JIS, and EUC.
Note - It is advisable to set the encoding option to the default value.
5.2.5 Threshold
Displays a list of the configured thresholds. You can also create new thresholds or change
the existing thresholds.
The table has the following fields:
•
Status - Indicates the status of the MIB variable that Device Manager is monitoring.
•
MIB Variable - Name of the MIB variable that Device Manager is monitoring.
•
Current Value - Current value of the variable.
•
Max Value - Highest value of the variable after Device Manager starts monitoring.
•
Min Value - Lowest value of the variable after Device Manager starts monitoring.
•
Average Value - Average value of the variable (per second) after Device Manager
starts monitoring.