Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 34)

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 34 of 124
Select Target Host dialog box
Target host
The host name or the IP address of the target host. To see the description of the
host, fill in host name or IP address and click Confirm. To connect to the host,
click OK.
Note - If "v3" is the selected SNMP version and the specified user account has no
READ VIEW access to the System Description OID but has READ VIEW access
to the System Object ID, clicking on the confirm button will display the message,
"Unable to retrieve system description."
SNMP Options
Version
This drop down list allows you to select the SNMP version to use in managing
the target device.
Note - Before choosing "v2c" or "v3", make sure that the target device you are
connecting to supports SNMP v2c and/or SNMP v3 respectively.