Allied Telesis x610 Series Layer 3 - Manual (Page 55)

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
55
AC Power Connector
The x610 switches have a single AC power supply socket on the rear
panel, which has autoswitch AC inputs. To power the switch on or off,
connect or disconnect the power cord.
For countries that require 100-125 VAC installations, the power cord plug
provided with the AT-PWR1200 power supply has a 20 Amp, 125 V NEMA
5-20P plug. This plug is only compatible with a NEMA 5-20R receptacle.
See Figure 32.
1965
G
W
Figure 32. 100-125 VAC 125 V NEMA 5-20 Plug and Receptacle
Refer to “Technical Specifications” on page 121 for the input voltage
range.