Allied Telesis x610 Series Layer 3 - Manual (Page 47)

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
47
Secure Digital (SD) LED
All x610 Series Switches have one Secure Digital (SD) LED, shown in
Figure 23 and defined in Table 11.
SD
BUSY READY FAULT
Table 11. SD LED Descriptions
LED Function State Description
SD Link Status
and Activity Flashing
Amber Indicates a fault has been detected.
The SD card is not valid or a read or
write procedure was unsuccessful.
Solid
Green An SD card has been detected.
Flashing
Green An SD card is reading or writing data.
Do not eject the SD card when it is in
this state.
Figure 23. SD Slot LED