Allied Telesis 8100S Series - Manual (Page 33)

Stack Installation Guide for 8100S Series Switches
33
Maximum
Distance
The ports have a maximum operating distance of 100 meters (328 feet).
Power Over
Ethernet
The 10/100/1000Base-T ports on the AT-8100S/24POE Switch does not
support PoE.
Cable
Requirements
The cable requirements of the ports are given in Table 7.
Port Pinouts Refer to Table 24 on page 134 and Table 25 on page 135 for the port
pinouts to the 10/100/1000Base-T ports.
Table 7. Twisted Pair Cable for the 10/100/1000Base-T Ports
Cable Type 10Mbps 100Mbps 1000Mbps
Standard TIA/EIA 568-B-
compliant Category 3 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 16 MHz. Yes Yes No
Standard TIA/EIA 568-A-
compliant Category 5 or TIA/
EIA 568-B-compliant Enhanced
Category 5 (Cat 5e) shielded or
unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz. Yes Yes Yes
Standard TIA/EIA 568-B-
compliant Category 6 or 6a
shielded cabling. Yes Yes Yes