Samsung SM-C105AZWAATT User Manual

Page 64

1. While on a call, tap Hold

Hold

. This action places

the current caller on hold.

2. You can later reactivate this call by tapping Unhold

Unhold

To make a new call while you hav

e a call in progress

1. Tap Hold

Hold

2. Tap Add call

to display the dialer.

3. Enter the new number and tap

Once connected, the active call will appear in a large

box at the top of your screen and the call on hold will

appear in a smaller box in the middle of your screen.

Switching Between Calls

When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.

1. Tap Swap .

The current call (caller #2) is placed on hold and the

previous call on hold (caller #1) is then reactivated so

that you can continue conversing with that person. The

active call will appear in a green box.

Personalizing

the Call Sound Setting

During a call it may be necessary to adjust the sound of the
incoming ca ll by selecting an audio equalizer setting for the
current call.

1. From the ca ll screen, tap

2. Confirm the option is enabled

3. Select a n available option. Choose from: Adapt Sound

left, Adapt Sound right, Soft sound, Clear sound, and

Off.

Activating N

oise Reduction

During a call it may be necess ary to activate the noise
reduction fe ature. Activating this feature can improve the
quality of your c onversation by reducing ambient noise.
Noise reduct ion in on by default.

1. Tap

to turn Noise reduction off.

2. Tap

to turn Noise reduction on.

Placing a Call on Hold

You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.

2. Tap

to end the currently active call.