Options during a call – Samsung SM-C105AZWAATT User Manual

Page 63

Options During a Call

Your phone provides a number of control functions that you
can use during a call.

Adjusting the Call Volume

During a call, to adjust the volume, use the Volume keys on
the left side of the phone.

Ⅲ Press the Up volume key to increase the volume level

and press the Down volume key to decrease the

volume level.

– or –

Quickly add more volume to the incoming audio by

tapping the on-screen Extra volume button

From the Home screen, you can also adjust the ringer volume
using these same keys.

In-Call Options

During an active call there are several functions available by
tapping a corresponding on-screen button.

•

Hold: place the current active call on hold.

•

Add call: displays the dialer so you can call another person.

•

Keypad: displays the on-screen keypad, where you can

enter number using DTMF (Dual Tone Multi-Frequency).

•

End call: terminates the call.

•

Speaker: routes the phone’s audio through either the speaker or

through the earpiece.

–

Tap Speaker to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.

–

Tap Speaker again to use the phone’s earpiece (see “Using
the Speakerphone During an Active Call” on page 59). The
green line will disappear when Speaker is not activated.

•

Mute/Unmute turn the onboard microphone either on or off.

–

Tap Mute during a call to mute the microphone. A green line
will appear under the Mute button.

–

Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.

•

Headset connects to a Bluetooth headset.

–

Tap Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.

–

Tap Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.

•

Tap

for more options:

–

Contacts: allows you to go to your Contact list.

–

Memo: allows you to write a memo.

–

Message: allows you to write a message during a call.

Call Functions