Setting up the end fax tone, 67 setting up the end fax tone – Samsung SCX-6555N-XBG User Manual
Page 67
Faxing (Optional)_ 67
Forwarding a sent fax to other destination by an
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Email Setting > Send
Forward.
6. Press On.
7. Enter the From and Destination Email option using the keyboard on
the display.
8. Press OK.
Forwarding a received fax to other destination by an
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Email Setting > Receive
Forward.
6. Press Forward and enter the From and Destination Email option using
the keyboard on the display.
•
If you want the machine to print the report after forwarding a fax, set
the Forward & Print.
7. Press OK.
Forwarding a sent fax to other destination by server
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Server Setting > Send
Forward.
6. Press On.
7. Press OK.
Forwarding a received fax to other destination by
server
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Server Setting > Receive
Forward.
6. Press On.
7. Press OK.
SETTING UP THE END FAX TONE
The end fax tone that sounds to indicate that the fax has been received can
be turned on or off.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Ending Sound.
6. Press On.
7. Press OK.
I
f Forward to Server Setting is on, this option will be grayed out.
If Forward to Server Setting is on, this option will be grayed out.
If Forward to Email Setting is on, this option will be grayed out. The server setting must
be done in SyncThru™ Web Service prior to this option on.
If Forward to Email Setting is on, this option will be grayed out. The server setting must
be done in SyncThru™ Web Service prior to this option on.