Samsung UN32H5500AFXZA - Manual (Page 50)

44
Connecting to a Wired Internet Network Manually
MENU
>
Network
>
Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
11
Set the
Network type
to
Wired
, and then select
Connect
.
Network Settings
Select your network type.
Network type Wired
Connect
You can connect your
TV to the internet.
21
Select
Stop
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select IP Settings .
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network IP Settings Retry Close