Samsung UN32H5500AFXZA - Manual (Page 174)

168
Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
"
You can configure the TV's universal remote function to control - using the TV's remote control -
third-party cable boxes, Blu-ray players, and home theaters that do not support HDMI-CEC. Refer to
the "Controlling External Devices with the TV Remote - Using the Universal Remote" section for more
information.
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not support
Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
"
The TV remote control may not function under certain circumstances. If this occurs, select the Anynet+
device again.
"
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on.
"
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With
home theater systems, however, the number of systems that can be controlled is limited to one.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
the device's digital audio output connector directly to the home theater system.
"
A home theater system that has been connected to the TV using an HDMI cable and an optical cable
supports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with
5.1-channel audio.
Setting Up Anynet+ (HDMI-CEC)
MENU > System > Anynet+ (HDMI-CEC)
Try Now
● Anynet+ (HDMI-CEC)
Try Now
Enables/disables Anynet+ (HDMI-CEC). Set to
Off
to disable all Anynet+ related features. Set to
On to enable all Anynet+ related features.
● Auto Turn Off
Try Now
When set to
Yes
, turns off Anynet + compatible external devices when the TV is turned off.
"
Some Anynet + compatible devices do not support this feature.
● Device search
Try Now
Automatically search for and identify Anynet+ (HDMI-CEC) compatible external devices that are
connected to the TV.